RANCANG ULANG PENGENDALIAN MUTU PRODUK PADA INDUSTRI KOMPONEN SEPEDA MOTOR MENUJU ZERO DEFECT UNTUK MENCAPAI OPTIMALISASI MANUFAKTUR
DOI:
https://doi.org/10.36761/jt.v2i3.172Keywords:
Failure Mode and Effect Analysis (FMEA), Reject , Zero DefectAbstract
PT. Indonesia Nippon Seiki is a manufacturing company that has been implementing quality control system, not necessarily achieve zero defect. This study aims to improve the quality control system to zero defect. The study was conducted on a company that produces two-wheeled automotive parts. The research applied Failure Methode and Effect Analysis (FMEA) method to identify the main problem of product defect, its cause and its impact. FMEA is conducted using 3 years production data on 3 assembly plants with field observation and interviews with key personnel in each factory. The results showed that the improvement needs to be done on the elements of the machine, human, methods and environment, after the improvement is done on the four elements of the product failed or reject and claim can be derived.
References
Dewayana, Triwulandari S (2012) “Peluang dan Tantangan Industri Komponen Otomotif Indonesia “ Jurnal Program Magister Teknik Industri Fakultas Teknologi Industri Universitas Trisakti
Effendi, Syafwansyah (2015) “ Perbedaan Risk Priority Number dalam Failure Mode And Effects Analysis (FMEA) Sistem Alat Berat Heavy Duty Truck HD 785-7 “Spektrum Industri, 2015, Vol. 13, No. 1, 1 – 114
FMEA Fourth Edition (2008) “Potential Failure Mode and Effect Analysis” Chrysler LLC, Ford Motor Company, General Motor Corporation.
Gaikindo, (2005 – 2016) “ Domestic Auto Production By Category January 2005 – November 2016 “ The Association Of Indonesia Automotive IndustriesGasperz,
Vincent. 2002. Pedoman Implemntasi Six Sigma Terintegrasi dengan ISO 9001:2000 , MBNQA dan HCCP. PT Gramedia Pustaka Utama. Jakarta.
Gasperz, Vincent. 2003. ISO 9001:2000 and Continual Quality Improvement. PT Gramedia Pustaka Utama. Jakarta.
Gasperz, Vincent. 2005. Manejemen Kualitas. PT Gramedia Pustaka Umum. Jakarta
Parasha, Shikha (2015) “Goal of Modern Industries: “Zero Defects, Zero Effect ” International Journal of Engineering Research and General Science Volume 3, Issue 2, March- April, 2015 ISSN 2091-2730
Puspitasari , Nia Budi (2014) “Penggunaan FMEA Dalam Mengidentifikasi Resiko Kegagalan Proses Produksi Sarung ATM (Alat Tenun Mesin) (Studi Kasus PT. Asaputex Jaya Tegal) “Jurnal J@TI Undip, Vol IX, No 2, Mei 2014
Kristyanto, Raka (2015) “ Analisis Risiko Operasional Pada Proses Produksi Gula Dengan Menggunakan Metode Multi Attribute Failure Mode Analysis (MAFMA) (Studi Kasus : PG. Kebon Agung Malang)” Jurnal Rekayasa Dan Manajemen Sistem Industri Vol. 3 NO. 3 Teknik Industri Universitas Brawijaya.
