ANALISIS GANGGUAN PADA KWH METER PELANGGAN DI PT. PLN (PERSERO) UP3 SUMBAWA MENGGUNAKAN FISHBONE DAN PDCA (PLAN, DO, CHECK, ACTION)

Penulis

  • Yuniar Adekayanti Universitas Teknologi Sumbawa
  • Iksan Adiasa Universitas Teknologi Sumbawa
  • Ismi Mashabai Universitas Teknologi Sumbawa

Kata Kunci:

Gangguan KWH, Fishbone, PDCA (Plan, Do, Check, Action), PT. PLN (Persero) UP3 Sumbawa

Abstrak

Along with the rapid development of technology in the industrial world, the need for electrical energy is also increasing. PT. PLN (Persero) UP3 Sumbawa is a state-owned company (BUMN) that helps provide and deal with various electricity problems in the surrounding area. Steps taken by this company in maintaining the safety and comfort of using electrical energy is to carry out regular checks at the customer's home. However, this step is deemed ineffective because the customer may not be at home during the checking. In addition, checking manually can also cause errors when recording the KWH meter, so that this can cause losses to the customer and the company. Therefore, PT. PLN (Persero) introduced a new system, namely the Automatic MeterReading (AMR) system. With this system, companies can read KWH meters remotely and automatically so that there are no more errors in recording KWH meters. However, the use of the system must be balanced with a good communication network. Several areas in Sumbawa still have difficulties in accessing the communication network, causing several disturbances to occur in the system. With the existence of various previous problems, a research was conducted to observe the types of disturbances as well as efforts to prevent and deal with disturbances in the KWH Meter system at PT. PLN (Persero) UP3 Sumbawa uses the Fishbone and PDCA (Plan, Do, Check, Action) methods.

Referensi

Adam, Latif. (2016). Dinamika Sektor Kelistrikan Di Indonesia: Kebutuhan Dan Performa Penyediaan. Jurnal Ekonomi dan Pembangunan Vol 24, No. 1.

Duyo, Rizal A. (2020). Analisis Penyebab Gangguan Jaringan Pada Distribusi Listrik Menggunakan Metode Fault Tree Analysis Di Pt. Pln (Persero) Rayon Daya Makassar.Makassar : Program Studi Teknik elektroFakultasTeknik Universitas MuhammadiyahMakassar.

Hariyati, Rina. (2015). Analisis Pembacaan Meter Otomatis Listrik Dengan Menggunakan Jaringan Komunikasi.Jakarta : Jurusan Teknik Elektro, STT-PLN Jakarta.

Heriyanto,Edi.(2016).StudiKasusKinerjaAMR(AutomaticMeterReading)Pada Pelanggan Potensial Daya 41.5 KVA – 200 KVA Di Situbondo. Jember: Universitas MuhammadiyahJember.

Kurniawan, Cepi dan Azwir, Herry Hamdi. (2018). Penerapan Metode PDCA Untuk Menurunkan Tingkat Kerusakan Mesin Pada Proses Produksi Penyalutan. Journal of Industrial Engineering. President University:Jababeka.

Montgomery, D.C. (2009). Introduction to Statistica Quality Control. New York: John Willey & Sons.

Ramadhan, S.A. (2010). Analisis Pemeliharaan (Maintenance) Mesin- Mesin Pembangkit Listrik Tenaga Gas (Pltg) Pt.Pln (Persero) Ranting Pekanbaru. Pekanbaru: Universitas Islam Negeri Sultan Syarif Kasim Riau.

Rochman,Choirul,DKK.(2015).ManajemenGangguanJaringanDistribusi20Kv KotaSurabayaBerbasisGeographicInformationSystem(GIS)Menggunakan Metode Algoritma Genetika. Jurnal Teknik ITS. Vol. 4,No.1.

Sallis, Edward. (2002). Total Quality Management in Education. Kogan Page.

Zakaria, P.R. (2014). Perbaikan Mesin Digester Dan Press Untuk Menurunkan Oil Losses Di Stasiun Press Dengan Metode Pdca (Studi Kasus Di Pt. Xyz). Sumatera Utara.

Diterbitkan

2021-04-19

Terbitan

Bagian

Articles