PEMANFAATAN ABU ROTAN SEBAGAI BAHAN TAMBAH TERHADAP KARAKTERISTIK MARSHALL CAMPURAN ASPAL AC – WC

Authors

  • NAELA HARDIANTI UNIVERSITAS TEKNOLOGI SUMBAWA
  • Hermansyah Teknik Sipil, Universitas Teknologi Sumbawa

DOI:

https://doi.org/10.36761/hexagon.v6i1.5287

Keywords:

AC-WC, MARSHALL, RATTAN ASH

Abstract

flexible pavement is a type of pavement that uses asphalt as a binder between the aggregates and has a good level of roughness so that it can be used for high vehicle speeds and has traffic that is not too dense so that it can reduce the maintenance process. One type of mixture in flexible pavement is AC-WC. This research was carried out to determine the effect of adding rattan ash to the AC-WC asphalt mixture by making normal samples and using rattan ash additives with variations of 0.2%, 0.4%, 0.6%, 0.8%. Next, marshall testing and analysis is carried out which includes cavity values, stability, flow and marshall quontient. The results of this analysis were then compared with the AC-WC asphalt mixture reference standard in the 2018 revision 2 specifications. From the results of the research that has been carried out, it can be concluded that the results of using variations of rattan ash will influence the void values ??in the asphalt mixture. From the use of rattan ash variations of 0.2%, 0.4%, 0.6% and 0.8% according to specifications. Of the 4 variations of rattan ash, the variation that got the optimum value was a variation of 0.8%, producing a void value of 4.58%, a void value in the aggregate was 18.35%, a cavity value filled with asphalt was 75.03%, a flow value was 3.60 mm, a marshall stability value of 991 kg, and residual marshall stability was 96.86%.

References

Lestari, I. G. A. I. (2013). Perbandingan Perkerasan Kaku dan Perkerasan Lentur. Jurnal Transportasi, 7(1), 133-134.

Maharani, A., & Wasono, S. B. (2018). Perbandingan Perkerasan Kaku Dan Perkerasan Lentur (Studi Kasus Ruas Jalan Raya Pantai Prigi-Popoh Kab. Tulungagung). Ge-STRAM J. Perenc. Dan Rekayasa Sipil, 1(2), 89-94.

Nofriandi, R. (2020). Pengaruh Penambahan Abu Batang Jagung Terhadap Karakteristik Marshall Pada Aspal Ac-wc (Doctoral dissertation, Universitas Islam Riau).

Putra, J. S., Inrinto, R. A., Rachman, R., & Palinggi, M. D. M. (2019). Pengaruh Penggunaan Serat Rotan Terhadap Stabilitas Dan Durabilitas Untuk Bahan Tambah Campuran Lataston. Paulus Civil Engineering Journal, 1(1), 26-36.

Simangunsong, J. E., & Alkas, M. J. (2022). Pemanfaatan Limbah Plastik Pet Sebagai Bahan Tambah Aspal Pada Campuran Asphalt Concrete Wearing Course (AC-WC). Teknologi Sipil: Jurnal Ilmu Pengetahuan dan Teknologi, 5(2), 26-33.

Sumardi, W. M., Lalamentik, L. G., & Sendow, T. K. (2022). Pemanfaatan Abu Serbuk Serabut Kelapa Sebagai Bahan Tambah Pada Campuran Aspal Beton (AC-BC) Terhadap Nilai Pengujian Marshall. TEKNO, 20(82), 449-458.

SNI 03-1968-1990. (1990). Metode Pengujian tentang Analisis Saringan Agregat

Halus dan Kasar. Badan Standarisasi Nasional Indonesia.

SNI 03-1969-1990. (1990). Metode Pengujian Berat Jenis dan Penyerapan Air Agregat Kasar. Badan Standardisasi Nasional Indonesia.

SNI 03-2439-1991. (1991). Metode Pengujian Kelekatan Agregat terhadap Aspal. Badan Standardisasi Nasional Indonesia.

Spesifikasi Umum Bina Marga 2018. (2020). Spesifikasi Umum 2018 Untuk Pekerjaan Konstruksi Jalan dan Jembatan (Revisi 2). Oktober, 1036

WAWAN, D. H. (2020). PENGARUH KADAR FILLER ABU BATU TERHADAP KARAKTERISTIK MARSHALL PADA CAMPURAN ASPAL BETON AC-BC (Doctoral dissertation, Universitas_Muhammadiyah_Mataram).

Wisnu, B., & Rachman, R. (2022). Karakteristik Campuran AC–WC Dengan Bahan Tambah Abu Tongkol Jagung. Paulus Civil Engineering Journal, 4(4), 610-19.

Published

2025-01-23