Design of Arduino-Based Lawnmower with Remote Control
DOI:
https://doi.org/10.51401/altron.v2i02.3158Keywords:
Arduino, Motor Driver, Receiver, Relay, Remote ControlAbstract
Lawn mower is a tool used to cut grass on a large yard, in operation this tool is still used manually. In this research a grass cutter with remote control has been made which aims to make it easier for users to mow the grass. The method used in this study is the experimental method. The research results obtained in the design of this lawn mower use several main components, namely the Receiver which functions to receive signals from the remote control, the Arduino which functions to receive and send signals to other components, the Motor Driver which functions to control the speed of the DC motor as the driving force for the cutting tool grass and a relay that functions to control ON and OFF the DC motor which drives the mower. The lawn mower can be controlled using a remote control up to a distance of 300 meters on flat and non-rocky areas.
References
D. Irawan and E. Fitriani, “Rancang Robot Pemotong Rumput Otomatis Berbasis,” vol. 6, no. 2, pp. 65–74, 2021.
J. Y. Akay, J. O. W. St, B. A. S. St, and A. S. M. L. St, “Rancang Bangun Alat Pemotong Rumput Otomatis,” pp. 1–6, 2013.
A. Wahidin, “Rancang Bangun Robot Pemotong Rumput Dengan Menerapkan Algoritma Fuzzy Logic Berbasis Arduino MEGA2560,” 2018.
M. K. A. Rosa, R. S. Rinaldi, and R. Illahi, “Rancang Bangun Prototype Mesin Pemotong Rumput Kendali Jarak Jauh Menggunakan Aplikasi Android,” vol. 9, no. 1, pp. 1–8, 2020.
F. Sains, D. A. N. Teknologi, U. Islam, and N. Alauddin, “Rancang Bangun Sistem Penyemprotan Pestisida Dan Pupuk Pada Tanaman Padi Menggunakan Mikrokontroler,” 2018.
F. D. Muhammad, R. Rahmawati, D. Pembimbing, and F. T. Industri, “Perancangan prototipe mesin pemotong rumput taman yang dikendalikan menggunakan smartphone via bluetooth,” 2016.
A. Isrofi, S. Nahwa, U. Oddy, and V. Putra, “Rancang Bangun Robot Pemotong Rumput Otomatis Menggunakan Wireless Kontroler Modul Esp32-Cam Berbasis Internet of Things (IoT),” vol. 15, no. 1, pp. 45–55, 2021.
I. Krista, E. D. M, and D. Suryadi, “Rancang Bangun Robot Terbang Model Tricopter Menggunakan STM32F”.
M. Nasution, “Karakteristik Baterai Sebagai Penyimpan Energi Listrik Secara Spesifik,” vol. 1099, pp. 35–40.
P. B. Suprianto, “Rancang Bangun Reduksi Vibrasi pada Motor Berbasis Arduino Uno dengan Notifikasi SMS”.
J. Teknik et al., “Perancangan dan Pembuatan Prototype Remote Control Buoys Bertenaga Baterai dengan Akuator Propeller,” no. 2581, pp. 75–80.
A. F. Anto and T. Sukardiyono, “Prototype Autonomous Rover Pembersih Sampah Pantai menggunakan ArduPilot,” vol. 4, no. November, pp. 202–209, 2019, doi: 10.21831/elinvo.v4i2.28793.
T. Ilham et al., “Rancang Bangun Unmanned Ground Vehicle ( UGV ) Dengan Kendali Jarak Jauh ( Unmanned Ground Vehicle ( UGV ) System Design With Remote Control ),” vol. 9, no. 5, pp. 2405–2413, 2022.
S. R. Wati and H. Singgih, “Pengaturan Pemotong Rumput Berdasarkan Ketebalan Menggunakan Kontrol PID Berbasis Mikrokontroler,” vol. 05, no. September, 2018.
F. T. Industri, “Pengembangan Semi Autonomous Mobile Robot Untuk Mengambil Objek dengan Mempertimbangkan Berat Objek,” 2016.
Published
How to Cite
Issue
Section
Copyright (c) 2024 Yogi Febriansyah Yogi, Muhammad Hidayatullah, Indra Darmawan , Desi Maulidyawati
This work is licensed under a Creative Commons Attribution 4.0 International License.
