ANALISIS POSTUR KERJA PADA PEKERJAAN PENGELASAN DI PT. XYZ (PERSERO) PADA PROYEK PEMBANGUNAN JETTY PLTMGU LOMBOK PEAKER DENGAN MENGGUNAKAN REBA, NBM DAN TREE DIAGRAM
DOI:
https://doi.org/10.36761/hexagon.v6i1.5125Keywords:
Postur Kerja, REBA, NBM, Tree DiagramAbstract
- XYZ is a State-Owned Enterprise (BUMN) engaged in the construction sector. One of the infrastructures currently being built by PT. XYZ is the Construction of the Lombok Peaker PLTMGU Jetty in Mataram. Based on the results of observations, it was found that there was a risk of danger to welding workers that could cause work-related illnesses in spun pile welding workers or piles, so further analysis is needed. This study aims to analyze work postures and complaints and provide suggestions for welding work at PT. XYZ on the Lombok Peaker PLTMGU jetty construction project. The methods used are the Rapid Entire Body Assessment (REBA), Nordic Body Map (NBM) and tree diagram methods. The results of the study obtained REBA on the first, second and fourth welders were at a high risk level. The results of the Nordic body map score for welder 1 are in the moderate category, meaning that corrective action may be needed. Several workers filled out complaints of pain in several parts of the body. The proposed improvements are adequate rest, adjusting the height of the pile to be welded to the height of the welder, the welder welding with a more upright body, and providing a chair for the welder. It is expected that this research can minimize the risk of work-related illness in welding work at PT. XYZ on the Lombok Peaker PLTMGU jetty construction project.
References
A. D. Joanda and B. Suhardi, “Analisis Postur Kerja dengan Metode REBA untuk Mengurangi Resiko Cedera pada Operator Mesin Binding di PT. Solo Murni Boyolali,” in Seminar dan Konferensi Nasional IDEC 2017, Surakarta: Unversitas Sebelas Maret, 2017, pp. 72–76.
A. Mutiah, Y. Setyaningsih, and S. Jayanti, “Analisis Tingkat Risiko Musculoskeletal Disorders (Msds) Dengan The Brieftm Survey Dan Karakteristik Individu Terhadap Keluhan Msds Pembuat Wajan Di Desa Cepogo Boyolali,” J. Kesehat. Masy. Univ. Diponegoro, vol. 2, no. 2, p. 18726, 2013.
A. Purbasari, “Analisis Postur Kerja Secara Ergonomi Pada Operator Pencetakan Pilar Yang Menimbulkan Risiko Musculoskeletal,” Sigma Tek., vol. 2, no. 2, p. 143, 2019, doi: 10.33373/sigma.v2i2.2064.
A. Walid, E. P. Putra, and Asiyah, “Pembelajaran Biologi Menggunakan Problem Solving Disertai Diagram Tree Untuk Memberdayakan Tree Diagram To Empower Logical Thinking and,” Indones. J. Integr. Sci. Educ. ( IJIS Edu ), vol. 1, no. 1, pp. 1–6, 2019.
D. Rahman, I. Adiasa, N. Hudaningsih, and S. F. Utami, “Metode Yang Terdapat Dibidang Ergonomi Digunakan Untuk Menentukan Tingkat Risiko Postur Kerja Dan Digunakan Secara Cepat Dalam Menilai Posisi Kerja .,” in UTS Student Conference, Sumbawa: Universitas Teknologi Sumbawa, 2023, pp. 240–249. [Online]. Available: https://conference.uts.ac.id/index.php/Student/article/view/575
D. Triana and W. O. Widyarto, “Relevansi Kualifikasi Kontraktor Bidang Teknik Sipil Terhadap Kualitas Pekerjaan Proyek Konstruksi Di Provinsi Banten,” J. Fondasi J. Tek. Sipil, vol. 1, no. 1, pp. 182–190, 2013, doi: 10.36055/jft.v2i2.1732.
I. Adiasa, N. Hudaningsih, M. Amirul, and S. A. Rohman, “Further Study on an Electric Bike Using a Cycling Posture Analysis, Universal Design, And Finite Element Simulation,” in 3rd Asia Pacific International Conference on Industrial Engineering and Operations Management, Johor Bahru: IEOM Society International, 2022, pp. 557–571. doi: 10.46254/ap03.20220093.
I. Adiasa, N. Hudaningsih, P. S. Utami, and S. A. Rohman, “Design Of Masin Maker Based On Work Posture Analysis, Kansei Engineering And Value Engineering,” in 3rd Asia Pacific International Conference on Industrial Engineering and Operations Management, Johor Bahru: IEOM Society International, 2022, pp. 572–582. doi: 10.46254/ap03.20220095.
M. Middlesworth, “A Step-by-Step Guide Rapid Entire Body Assessment (REBA),” 2012, Ergonomics Plus Inc, United States. [Online]. Available: https://ergo-plus.com/reba-assessment-tool-guide/
M. Natsir et al., Era Baru Konstruksi Berkarya Menuju Indonesia Maju, 1st ed. Jakarta: Direktorat Jenderal Bina Konstruks, 2021. [Online]. Available: https://binakonstruksi.pu.go.id/storage/Buku_Konstruksi_2021_1-compress.pdf
N. A. Hanif, “Upaya Pencengahan Penyakit Akibat Kerja Pada Perawat Di Ruang Inap,” 2020, doi: https://doi.org/10.31219/osf.io/jxfcr.
N. A. Silviana, “Penilaian Postur Kerja PekerjaDengan Menggunakan Metode REBA dan Biomekanika (Studi Kasus PT. XY Di Bagian Packing),” J. Ilm. Tek. Ind. Prima (JURITI PRIMA), vol. 2, no. 2, pp. 10–16, 2019, [Online]. Available: http://jurnal.unprimdn.ac.id/index.php/juriti/article/view/586
N. Ulfah, S. Harwanti, and P. J. Nurcahyo, “Sikap Kerja dan Risiko Musculoskeletal Disorders pada Pekerja Laundry,” Kesmas J. Kesehat. Masy. Nas. Vol., vol. 8, no. 7, pp. 313–318, 2014, doi: 10.21109/kesmas.v0i0.371.
R. N. Jalajuwita and I. Paskarini, “Hubungan Posisi Kerja Dengan Keluhan Muskuloskeletal Pada Unit Pengelasan PT. X Bekasi,” Indones. J. Occup. Saf. Heal., vol. 4, no. 1, pp. 33–42, 2015, doi: 10.20473/ijosh.v4i1.2015.33-42.
S. Shobur, Maksuk, and F. I. Sari, “Faktor Risiko Musculoskeletal Disorders (MSDs) Pada Pekerja Tenun Ikat Di Kelurahan Tuan Kentang Kota Palembang,” J. Med. (Media Inf. Kesehatan), vol. 6, no. 2, pp. 113–122, 2019.
T. S. Pramono, “Analisis Faktor-Faktor Yang Berpengaruh Pada Produktivitas Kerja Karyawan,” J. Ilmu Manaj. Terap., vol. 1, no. 6, pp. 580–589, 2020, doi: 10.31933/jimt.v1i6.216.
W. Tatik and N. R. Eko, “Hubungan Antara Postur kerja, Umur, dan Masa Kerja dengan Keluhan Musculoskeletal Disorders (MSDs) pada Pekerja di CV. Sada Wahyu Kabupaten Bantul Yogyakarta,” J. Lentera Kesehat. Masy., vol. 2, no. 1, pp. 1–23, 2023, doi: https://doi.org/10.69883/jlkm.v2i1.24.
Published
Issue
Section
Copyright (c) 2025 Hexagon
This work is licensed under a Creative Commons Attribution 4.0 International License.
